Innovation that empowers you!

Zegul Arrow Nuka GT

Zegul Arrow Nuka GT
Rollover an image for a closer inspection.
*All images used are for illustrative purposes only

The Arrow Nuka GT is relatively short at 5.05 meters but despite its length it has a very effortless glide and great acceleration. The Nuka gt has a speed optimized hull and soft chine’s, the hull is rounded for less resistance and less wet surface making the Nuka gt glide effortlessly through the water.

The Arrow Nuka GT is a touring kayak. It has much practical deck line layout. The rear hatch is oval making it easy to load the kayak on overnight trips. The GT has less rocker and more raking bow and stern which increases the waterline when loaded. The GT is still a nimble kayak and is slightly faster and has better acceleration than the old nuka. The nuka GT can be easily fitted with a rudder for those who prefer to focus forward momentum rather than the correction strokes and edging. The Nuka GT has been very popular since it was introduced in spring 2012. Especially the carbon version weighing around 19 kg is very attractive to those who handles their kayak alone.

RAL 9005
RAL 5015
RAL 3000
RAL 1013
RAL 7035
RAL 2011
RAL 7046
Standard features:   Light weight click-on hatches, thigh pads, aramide seam, rubber deck beads, retractable skeg
Optional features:   Aramide reinforced keel strip, compass, rudder
Length:   505 cm (16’7″)
Width:   52 cm (20½”)
Capacity approx.:   145 kg (320 lbs)
Cockpit:   80 x 41 cm (34½” x 16″)
A-CORE:   22-24 kg (48-59 lbs) 
3D C-CORE:   19-22 kg (41-49 lbs)
ROCK SOLID:   22-24 kg (48-59 lbs)
Front, Round Hatch:   24 cm (10″)
Mini-box:   15 cm (6″)
Day-hatch: Round Hatch:   20 cm (8″)
Rear, Oval Hatch:    44 x 26 cm (17″ x 10¼”)
Retractable skeg + rudder / skeg

Vacuum infusing, which we use in Zegul production, is one of the most advanced construction methods used in the composite industry.This production method ensures the best strength/weight ratio possible. Here we are combining the high-performance properties of marine grade epoxy resin with several types of carbon fibre, carbon/aramide and glass fabrics to create very high-end products with smooth and clear carbon look.

For smaller components we use light RTM production method. This method has been securing us the high interpretation rate in our products. This method ensures a high rate of production.

We use three different constructions in Zegul production - A-CORE, 3D C-CORE and ROCK SOLID.
We use only one of the best hatch covers on the market.
We use only one of the best retractable skegs on the market.
Several skeg control systems available!